Bicycles

Any adventure, road or trail, rough or smooth, wet or dry, high or low... we designed our A:1 to be beyond versatile. It's the bike we'd always wanted that we could never find, so we designed it and we built it. An unassuming contender, custom built with all the essential components. It's lightweight and fully adaptable for outfitting, and adventures off the beaten path. Our custom geometry is key, designed to make the A:1 handle quickly, track precisely and carry speed stably over different terrains. The bike feels tough, whilst fluid and agile... it's strength and beauty all in one. The bike hits well above its weight, already earning a cheeky reputation for race wins.

Any adventure, road or trail, rough or smooth, wet or dry, high or low... we designed our A:1 to be beyond versatile. It’s the bike we’d always wanted that we could never find, so we designed it and we built it. An unassuming contender, custom built with all the essential components. It’s lightweight and fully adaptable for outfitting, and adventures off the beaten path. Our custom geometry is key, designed to make the A:1 handle quickly, track precisely and carry speed stably over different terrains. The bike feels tough, whilst fluid and agile... it's strength and beauty all in one. The bike hits well above its weight, already earning a cheeky reputation for race wins.

We designed and built this bike specifically to make the everyday ride far more than just an everyday ride. We began with our no compromise belief that every Roll bike should be effortlessly quick, forward thinking, and ultimately versatile. Custom geometry was essential to make the C:1 supremely comfortable, whilst swift and extremely agile. Our sculpted streamline frame and bespoke roll: custom riser bars, puts you in a more relaxed head and shoulder position, while still maintaining the most efficient pedal stroke. And whatever your journey, integrated mounting points allow a full complement of accessories and options. The C:1 presented us with the challenge to create an upright, comfortable and confident rider position without sacrificing our performance ideals. A 10 speed (1x10) drivetrain with a single, sequential thumb shifter excels in this set up, for more intuitive shifting, and lower maintenance. The disc brakes on the C:1 provide consistent, assured braking far beyond traditional rim brakes, and although they're hidden, we favor superior sealed bearings throughout for low maintenance and maximum lifespan. The components we use are anything but 'standard'. We're committed to sourcing the best, and if we're not satisfied we design our own. You'll feel a distinct difference in the ride, not because of one exceptional component but the considered combination of them all. We'll custom build this bike specifically for you.

We designed and built this bike specifically to make the everyday ride far more than just an everyday ride. We began with our no compromise belief that every Roll bike should be effortlessly quick, forward thinking, and ultimately versatile. Custom geometry was essential to make the C:1 supremely comfortable, whilst swift and extremely agile. Our sculpted streamline frame and bespoke roll: custom riser bars, puts you in a more relaxed head and shoulder position, while still maintaining the most efficient pedal stroke. And whatever your journey, integrated mounting points allow a full complement of accessories and options. The C:1 presented us with the challenge to create an upright, comfortable and confident rider position without sacrificing our performance ideals. A 10 speed (1x10) drivetrain with a single, sequential thumb shifter excels in this set up, for more intuitive shifting, and lower maintenance. The disc brakes on the C:1 provide consistent, assured braking far beyond traditional rim brakes, and although they're hidden, we favor superior sealed bearings throughout for low maintenance and maximum lifespan. The components we use are anything but 'standard'. We're committed to sourcing the best, and if we're not satisfied we design our own. You'll feel a distinct difference in the ride, not because of one exceptional component but the considered combination of them all. We'll custom build this bike specifically for you.

We imagined it, we designed it, and we built it: all that we desired in a flat bar road bike crafted and engineered with superior components and uncompromised by convention or price. An iconic double diamond profile, deceptively fast, and deliberately understated. Ideal for those days when you want to sweat a little, or commute, or maybe both. The S:1 is designed with meticulous attention to detail. Ultimately to get you there discreetly, effortlessly, and very, very quickly. With the S:1 we were determined to refine rider position to achieve superior control, handling, and comfort without sacrificing forward motion. Gender specific sports saddle, our custom roll: flat handlebar and cockpit set up combine to create the most effective and efficient position to transfer power into the pedals. There's a single thumb shifter for intuitive gear changing and a nifty 1x10 drive train that has the range of a traditional 2x9 but without the weight of a front derailleur. Our disc brakes offer performance far beyond traditional rim brakes, and although they're hidden, we favor superior sealed bearings throughout for low maintenance and maximum lifespan. The components we use are anything but 'standard'; We're committed to sourcing the best, and if we're not satisfied we design our own. You'll feel a distinct difference in the ride, not because of one exceptional component but the considered combination of them all. If you like to go faster farther, you'll fall in love with the S:1.

Our New A:1R was a process of reduction. The distillation of all its parts to the simplest, most capable, and most efficient combination, to produce a bike that performs far beyond its class. Designed to tackle longer gravel and multi-surface rides the A:1R is built for explorers and all day adventures. The A:1R is equally at home in town or country, beautifully designed, and like all of our bikes, can be fully outfitted with racks, luggage, and accessories to take you around the block or across the country.

The Limited Edition CR:1 Cafe Racer is one of the most distinctive rides to roll out of our studio, and the first in our limited edition series of roll: bikes. Brooks Cambium modern classic contact points add style points, while our 27.5" Black Out Moto wheel set, shod with 1.95" inch WTB Thickslicks, smooth out all the bumps in the road as you rip through the streets. SRAM Level hydraulic brakes throw out the anchors when you need them.

The Radix is where radical meets attainable. Our custom chromoly DJ delivers serious shredding at a budget-friendly price. DJ must-haves include a suspension fork and rear disc brake. It features an updated frame and the same proven spec, including sealed wheels and mid BB, 26-12T gearing, heat-treated tubular chromoly cranks, and a custom Verde Hex 1-piece seat/post combo. - CNC machined, integrated 1.5" tapered head tube paired with an RST Dirt 80mm-travel fork with an extra firm HD spring - Tektro Aires mechanical disc brake with 160mm stainless steel rotor for performance braking control - Lightweight Verde Hex 1-piece seat/post combo with quick-release clamp for on-the-go adjustments - Top Tube Length: 22.34" (23.22" effective)

Command the Road in Style and Comfort! The Gran Tourismo is alluringly sophisticated with exhilarating performance resulting in the ultimate touring machine. With a nod to the original Tour, the GT is the culmination of over 20 years of continuous innovation and customer feedback, resulting in the most comfortable and best handling TerraTrike to date! The Y-frame design adds strength while allowing for additional heel clearance and ease in getting in and out. The new triangulated rear end adds pedaling efficiency, better aerodynamics, reduced pedal steer and lower center of gravity so that you "stick" to the road even at higher speeds. The GT also comes standard with a 24" rear wheel for higher top-end speeds, smoother rolling over bumps and retaining momentum. The Gran Tourismo also features an extended seat frame with an upgraded seat mesh, contoured to give additional support and comfort and padded in "all the right places!" This is by far the most comfortable seat TerraTrike has ever produced! The depth of the "wet" paint colors is stunning and limited edition colors will be offered periodically. The Gran Tourismo is the perfect trike for a cross-country adventure, your daily commute, or a leisurely trail ride to your favorite destination. 18 Speeds: - The Gran Tourismo utilizes an external derailleur system. Extended Seat Pan: - The Gran Tourismo has an extended seat pan and the Comfort Mesh seat for increased lateral support. Trigger Bars & Shifters: - Offset ergonomic handlebars accommodate most trigger shifters. Rear Triangle - The new rear triangle frame design adds efficiency to every pedal stoke It also provides an excellent platform for mounting a variety of bags and accessories. Chro-Moly Steel Frame: - Chro-moly steel provides the perfect balance of stiffness efficiency and comfort. Premium Steering Stack: - The premium steering stack features angular contact bearings and bushings for a tunable steering feel.

The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hub and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).

The Ogre can get you to your job during the week, then way out of town on the weekend. It’s not sluggish on pavement or gravel and can also hold its own on singletrack. Ogre brings several sensible features to the 29er platform, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefy tire clearance. - 100% Surly Chromoly steel, double-butted main triangle - TIG-welded, Horizontal slotted with derailleur hanger, Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle or 148 x 12mm Boost hubs. Features Rohloff torque arm slot and threaded eyelets for fenders, racks and Surly trailer mounts - Full-length Surly Trip Guide housing line guides for derailleurs and brakes; two sets of bottle cage mounts; upper seatstay threaded barrels, mid- and low-blade fully threaded through-blade fork eyelets; threaded holes for racks, fenders and trailer mounting nuts; Rohloff OEM2 axle plate mounting slot - Disc brakes only. Disc mounts are 51mm IS. Note: rear disc brake is limited to 160mm maximum rotor diameter and requires the use of Surly caliper adaptor (included with frames and bikes) - Frame is E.D. coated for increased life expectancy - Tire clearance for 29 x 2.5" or 27.5 x 3"

Revolutions offers up the perfect mix of style and value to create a cruiser that's simple and fun to ride. An extra-long wheel base, super-wide tires, and upright riding position make the Revolutions comfortable, durable, and easy to ride, exactly what's needed for just cruising around. - Classic high-tensile steel frame - Single-speed coaster brake version also available in a 24" wheel for smaller riders - limited colors - One-piece steel crank - Alloy rims with stainless steel spokes - 26" x 2.50" cruiser tires - Mid-rise steel cruiser handlebar - Sun Cruiser saddle - Steel chain guard - Steel kickstand

If you've got cycling on your mind but crave the added stability and comfort of three wheels, then the Traditional Trike is what you're looking for. Our trike is specifically designed with an ultra-low step through frame, like our Streamway, for easy on and off access. Once seated, you immediately notice the impressive comfort of the tractor style saddle. If bigger is better, then Sun hit pay dirt. - High-tensile steel easy step-through frame with compatibility for optional direct mount rear derailleur and disc brake - Single-speed gearing (Internal 3-speed, Internal 5-speed and 7-speed derailleur kits available for purchase separately) - Alloy linear-pull front brake with brake lever actuated parking lock (Rear axle disc brake caliper kit available for purchase separately) - Single wall alloy rims with stainless steel spokes - 24 x 1.75" CST street friendly tires - Sun Trike High Rise steel handlebar - Sun Tractor padded saddle with heavy duty steel base - Steel chain guard - Nickel plated steel front fender - Vinyl coated steel wire basket, 21 x 15 x 9"

Across campus or around town, Sun's Cruz 3 will get you there in style. The agile aluminum frame boasts classic lines for a cool, old-school flavor. And, the 3-speed rear hub lets you pick the perfect gear, whether you're racing to get to class or work, or just climbing the hill back home. Plus, the springer saddle and wide, swept-back bars deliver an awesome upright position, while the fenders keep you clean and dry even when road conditions are less than ideal.

If you've got bicycling on your mind but crave the added stability and comfort of a three wheeler, then the Miami Sun is just what you're looking for. This new Traditional 24" 7-Speed model takes all of the great features of the original Traditional 24" trike and adds easy twist-shift gearing to smooth out the hills. We’ve also added a powerful rear disc brake to complement the front linear-pull brake for solid on-demand stopping power. With its comfortable ride quality, low step-over frame and great equipment, the Traditional trike line has been a best-seller for years and now it’s even more well equipped. Take the Traditional 24" 7-Speed for a spin today and see for yourself how bright the Miami Sun is. - High-tensile steel Low-Step frame - Sunrace 7-speed drivetrain (13-15-18-21-24-28-34T) - Sunrace twist shifter - Alloy linear-pull front brake with parking lock - Mechanical disc rear brake with parking lock - Alloy rims with stainless steel spokes - 24 x 1.75" tires - 9" high-rise steel handlebar and stem, foam grips - Sun Tractor saddle with heavy-duty steel base - Steel chain guard and nickel-plated front fender - Vinyl-coated steel wire basket

We believe in raising kids who excel at life and always have the courage to tackle whatever comes next. That’s why the Strider 12 Sport Balance Bike has become the ultimate vehicle for kids as young as 18 months. Your tiny-legged toddler is ready to ride, thirsting for freedom, and craving adventure. Give your child the bike that set the world on fire and encourages them to experience the thrill of riding while developing confidence and coordination…before they’re even out of diapers. The Sport is our best all-around model. Mini-grips mean little mitts can easily take control and make this lean, mean, durable bike the biggest bang for your buck, which is probably why it’s our best seller. The 12 Sport is the perfect bike to take your child from baby steps to big strides, all without busting out a toolkit (tool-free seat and handlebar adjustment AND tires that never go flat). The Strider Sport has a seat height range from 28-48 cm (11-19 in.), which means it fits a huge range of inseam lengths (30-51 cm [12-20 in.]). The cushy, padded seat and an additional extra-long seatpost means your child will get years out of their Strider. Boring specs aside, this is the bike that introduces kids to the freedom, power, and responsibility of riding. Now they have the power to keep up with you when you’re out and about. No more strollers. No more of those ridiculous kid leashes. Your child can experience the truly amazing freedom that comes with being a part of the Strider family. Size & Fit - For Ages 18 months to 5 Years - Fits inseam lengths (30-51 cm [12-20 in.]). - Max. Rider Weight: 27 kg (60 lbs.) FRAME Steel Frame Assembled Weight: 3.0 kg (6.7 lbs.) No-Tool Assembly Fully Adjustable with Easy-Adjust Clamps HANDLEBAR Handlebar Height: 46 - 56 cm (18 - 22 in.) Mini-Grip Handlebar with Safety Pad SEAT Seat Height: 28 - 48 cm (11 - 19 in.) Includes One, Ergonomically-Padded Seat Includes Standard and XL Seatposts WHEELS Ultralight Molded Wheels with Maintenance-Free Sealed Cartridge Bearings and Flat-Free Foam Rubber 12” Tires FOOTREST Built-In Footrests

Training wheels or a balance bike It's a dilemma many parents face today. Most adults learned to ride a bike with stabilizers, but what if there were an easier way There is. You're looking at it. Instant success. That's what we wanted kids to experience on the Strider 14x Sport. We put together all the right ingredients to give your tyke a taste of confidence to successfully shift from riding a balance bike to pedaling like a pro as quickly as possible. Why Because of the success your child experiences when they ride a Strideris going to stay with them throughout their life. Kids from all over the world are learning how to ride on the 14x Sport. The confidence and freedom that comes with learning how to pedal a bike rockets them into a level of the awesome sphere they didn't even know existed. Plus, parents get to see their child grow and develop right before their eyes. Pretty cool, right The 14x starts off as a balance bike, which helps kiddos who either haven't been on a bike before or are veteran Strider riders gain confidence and balancing ability on a bigger bike. Once your little renegade is ready to pedal, just attach the Easy-Ride Pedal Conversion Kit (sold separately) andVOILÁ!You got the most adjustable, most amazing pedal bike in the world. It gets better. If your mini-me is sprouting up faster than a weed amped up on fertilizer, the adjustable seat and handlebars meanthe14x Sport will continue to fit them. Converting the 14x from balance bike to pedal bike is super quick and easy (we even give you the wrench to screw in the only bolt) and the pedal kit has coaster brakes making skid marks easy peasy. Now, your kid is pedaling around the neighborhood thinking you're a superhero forgetting them a 14x. They're realizing their skills and freedom with newfound confidence and thirst for adventure. And now, your neighbors all have to step up their parenting game. Yeah, we'd call that a parenting win. FULL SPECS: - Size: 14" Wheels - Weight: Bike without Pedal Kit 5.7 kg (12.5 lbs.) - Weight of Bike with Pedal Kit (sold separately) 6.9 kg (15.1 lbs.) - Brakes in pedal mode (pedal kit sold separately): Coaster Brakes - Brakes in balance mode: None - Fits Inseam: 40-58 cm (16-23 in.) - Rider Height: Approx. 95-125 cm (37-49 in.) - Rider Age: 3 to 7 years - Seat Height: 38-55 cm (15-22 in.) - Maximum Rider Weight: 36 kg (80 lbs.) - Frame and Fork: Steel - Head Set: Strider Custom Polymer - Steering Clamp: Binder Clamp (5 mm Wrench Adjustable) - Seat Clamp: Easy Adjust Lever Clamp (No-Tool Adjustment) - Tubes: Schrader Valve Air Tube - Tires: 14" x 1.75" All-Purpose Tires - Wheels: Alloy Rims and Hubs, Chrome Spokes - Footrest: Included - Stem: Strider Custom Alloy/Steel, 25.4 mm Bar Mount - Handlebar: Strider Custom 22.2 mm, 68 mm rise, 25.4 mm mount, 4°backsweep/ 4°upsweep - Grips: Strider Custom 22.2 mm - Seat: Strider Custom Performance Saddle - Seatpost: 22.2 mm x 293 mm - Tools Included: 5 and 6 mm Hex Wrenches - Assembly: Bike is 85% Assembled - CPSC Tested and Approved

The cruiser that helped start the big bike craze! The Saint has a proven geometry, armored with 100% chromoly tubes in its frame, fork & bar, all sealed bearings & Mob cranks make this bike hard to beat!

The Zeke is a great all around bike that can pull that mile long wheelie or three out of the bowl, and did we mention it looks cool? 100% ChroMoly, 100% sealed bearings (-pedals) & Mob cranks round out this iconic bike.

The Max is an amazing big boy wheelie bike but where other brands fail and the Max rules is when you ride it like a real BMX bike! 100% ChroMoly, 100% sealed bearings & Mob cranks makes the Max a clear market leader.

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 139 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 129 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Stormchaser is our single-speed gravel bike designed to prevail through bad weather and drivetrain-crunching conditions. The 6066-T6 alloy frame features our Class 5 VRS (vibration reduction system) for comfort and composure on harsh roads. The compliant carbon fork comes with extra tire clearance and protection plates to prevent wear from muddy tires. Alternator Flat Mount dropouts allow for solid single-speed setups or 1x drivetrains (with geared dropout plate, sold separately). Frame and fork mounts make it easy to carry extra food and water on long rides, while the rack and fender mounts add a layer of versatility. Stormchaser is a trusty partner for single speed enthusiasts or gravel riders who saddle up no matter what. Key Features: - On-bike Storage: Carry more on your bike and less on your body. Our frames and forks feature mounts for extra bottles, camping gear, and ride accessories. - Class 5 VRS: Soak up rough gravel roads. Our bowed seatstays are compliant while horizontally oriented chainstays resist torque for lateral stiffness. - Alternator Dropouts: Tune your ride characteristics and switch to single speed with ease. Our swappable dropout plates allow for multiple drivetrain options. - Frame Protection: Worry less about bike damage. Our frames and forks are designed and built to hold up to the rugged adventures you put them through.

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

Fargo Apex 1 is Salsa's drop-bar off-road touring bike built to shatter limits. Ride it on singletrack, gravel, or other places where you wouldn't take your standard touring bike. A triple-butted steel frame and huge tire clearance provide cushion on rugged roads. Alternator dropouts allow for any drivetrain you can imagine, and cargo mounts let you carry enough to go days between resupplies. SRAM's Apex 1 drivetrain is a reliable workhorse with the range for many adventures. - Triple Butted Cromoly Tubeset Salsa-designed, triple-butted, and frame size-specific seamless CroMoly tubing - Firestarter 110 Fork Light, tough, and ultra-versatile, this is our carbon fork for all-terrain riding. Two sets of Three-Pack mounts on each fork leg give you room for extra water or Anything Cages, and mid-blade mounts accommodate low rider racks. Firestarter fits a wide range of tire sizes, from 27.5 x 2.8–3.0" to 29 x 2.2–3.0" - Fargo Geometry Designed as a drop bar mountain bike, optimized for fit with the Salsa Woodchipper or Cowchipper handlebars. Capable of handling everything from technical singletrack trails, two-track, gravel, and the occasional paved road. Predictable handling with or without a load. The bike to ride for multiple-surface excursions - Alternator Dropouts V1.5 A split-able version of our renowned Alternator Dropout for ultimate drivetrain versatility. Run singlespeed or geared, QR or thru-axle, freehub or Rohloff, or Gates Belt Drive. Set Alternator Dropouts all the way forward for a shorter wheelbase that results in quick and nimble handling or set back for more stability. See our Alternator Page for more info - Belt Drive Compatible Tested and certified for belt drive use - 29 x 2.2" Wheel/Tire Spec This wheel and tire size rolls fast, keeps weight down, and offers excellent maneuverability - Multiple Wheelsize Versatility Fargo geometry and spacing can accommodate 27.5+, 29", and, on sizes small to x-large, 29+ making for a highly capable bike that's ready for just about any endeavor - Rear Rack Friendly Designed for use with the Salsa Alternator Plus Rack 135/142/148

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Any adventure, road or trail, rough or smooth, wet or dry, high or low... designed to be beyond versatile. It’s the bike you've always wanted that we could never find. An unassuming contender, custom built with all the essential components. It’s lightweight and fully adaptable for outfitting, and adventures off the beaten path. The custom geometry is key, designed to make the A:1 handle quickly, track precisely, and carry speed stably over different terrains. The bike feels tough, whilst fluid and agile... it's strength and beauty all in one. The bike hits well above its weight, already earning a cheeky reputation for race wins.

Any adventure, road or trail, rough or smooth, wet or dry, high or low... designed to be beyond versatile. It’s the bike you've always wanted that we could never find. An unassuming contender, custom built with all the essential components. It’s lightweight and fully adaptable for outfitting, and adventures off the beaten path. The custom geometry is key, designed to make the A:1 handle quickly, track precisely, and carry speed stably over different terrains. The bike feels tough, whilst fluid and agile... it's strength and beauty all in one. The bike hits well above its weight, already earning a cheeky reputation for race wins.

At the heart of the A:1R is the 6061 double butted aluminum frame and supple hydro-formed aluminum fork. Combine a custom short-reach drop handlebar, with a 0 degree set back seat post to shift the rider forward into an efficient, comfortable, all-day-long riding position. Roll's streamlined frames have been engineered to provide lateral stiffness for exceptional power transfer, combined with vertical compliance for a remarkably comfortable ride. Designed and engineered for the long haul in every detail, incorporating internally routed cables with end-to-end housing for clean, consistent, and low service shifting and braking.

Designed and built specifically to make the everyday ride far more than just an everyday ride. Custom geometry was essential to make the C:1 supremely comfortable, whilst swift and extremely agile. A sculpted streamline frame and bespoke roll: custom riser bars, puts you in a more relaxed head and shoulder position, while still maintaining the most efficient pedal stroke. And whatever your journey, integrated mounting points allow a full complement of accessories and options.

Designed and built specifically to make the everyday ride far more than just an everyday ride. Custom geometry was essential to make the C:1 supremely comfortable, whilst swift and extremely agile. A sculpted streamline frame and bespoke roll: custom riser bars, puts you in a more relaxed head and shoulder position, while still maintaining the most efficient pedal stroke. And whatever your journey, integrated mounting points allow a full complement of accessories and options.

The GR:1 has been built to travel off the beaten path. We start with our new sealed bearing 650b wheel set, equipped with the light and supple Teravail Rampart 47mm wide gum wall tires, designed for rough pavement, gravel roads and well beyond. We switch to a lower range 34t front chainring as part of our preferred 1x10 drivetrain for greater climbing ability when the road gets rough and goes upwards. Upgraded SRAM level hydraulic brakes provide consistent, confidence inspiring stopping power, without fading over long descents. We love the feel of the premium Brooks Cambium C17 saddle and Cambium grips, that give all weather control and comfort you can settle into for long days exploring in the saddle.

The S:1 is stacked with impressive yet discreet details. At its heart is its iconic classic frame. A flat-bar road bike crafted and engineered with superior components and uncompromised by convention or price. An iconic double diamond profile, deceptively fast, and deliberately understated. Ideal for those days when you want to sweat a little, or commute, or maybe both. The S:1 is designed with meticulous attention to detail. Ultimately to get you there discreetly, effortlessly, and very, very quickly.

The S:1 is stacked with impressive yet discreet details. At its heart is its iconic classic frame. A flat-bar road bike crafted and engineered with superior components and uncompromised by convention or price. An iconic double diamond profile, deceptively fast, and deliberately understated. Ideal for those days when you want to sweat a little, or commute, or maybe both. The S:1 is designed with meticulous attention to detail. Ultimately to get you there discreetly, effortlessly, and very, very quickly.

The Limited Edition CR:1 Cafe Racer is one of the most distinctive rides to roll out of the studio, and the first in our limited edition series of roll: bikes. Brooks Cambium modern classic contact points add style points, while our 27.5" Black Out Moto wheelset, shod with 1.95" inch WTB Thickslicks, smooth out all the bumps in the road as you rip through the streets. SRAM Level hydraulic brakes throw out the anchors when you need them.

Available in five wheel sizes and multiple frame sizes, there's an Edge model ready to get them set up right for the ride ahead. Every Edge model is best for kids of any age learning to ride and for mastering the basics. - Economical hardtail, aimed at smaller riders

Available in five wheel sizes and multiple frame sizes, there’s an Edge model ready to get them set up right for the ride ahead. Every Edge model is best for kids of any age learning to ride and for mastering the basics.

The Fusion is the perfect blend of efficiency, capability, and reliability on the trail. The Fusion's responsive handling characteristics and comfortable geometry will help you mix up your ride from the pathway, to the trail, and onto the singletrack. The Fusion's geometry has been optimized to provide you with the best possible experience when heading out for a ride. We've updated the geometry to reflect the needs of a true "downcountry" rider, including 29" wheels, a low standover height, longer reach, and a slacker head tube angle. With features like 100 mm of front travel, internal cable routing, and a 1x drivetrain, the Fusion sits at the top as our best all-around hardtail. - Modern Downcountry geometry - Stable and fun - Lightweight alloy frame - Simple & reliable 1x drivetrain

Burly hardtail goodness in three sizes. Whether they’re hopping off curbs or charging rowdy singletrack, the Growler Jr sets kids up right to ride hard and have fun doing it. Best for experienced junior riders who aren’t afraid to go big. Frame size: 26" Height: 137.5 - 152.5 cm / 4'6" - 5’0"

The Fusion is the perfect blend of efficiency, capability, and reliability on the trail. The Fusion's responsive handling characteristics and comfortable geometry will help you mix up your ride from the pathway, to the trail, and onto the singletrack. The Fusion's geometry has been optimized to provide you with the best possible experience when heading out for a ride. We've updated the geometry to reflect the needs of a true "downcountry" rider, including 29" wheels, a low standover height, longer reach, and a slacker head tube angle. With features like 100 mm of front travel, internal cable routing, and a 1x drivetrain, the Fusion sits at the top as our best all-around hardtail. - Modern Downcountry geometry - Stable and fun - Lightweight alloy frame - Simple & reliable 1x drivetrain

The Growler proves that the secret order of hardtail trail shredders is alive and thriving. Sure, it's got that classic hardtail profile. But 21st century touches across the platform reveal a future proofed, instant classic. 29x2.6 tires for ridiculous grip. An aggressive ride character for surprising levels of confidence while descending or ripping tough trails. A refreshingly simple (and tough) package for rowdy days at the trails. More satisfying than a tropical IPA growler fill on a hot day-and way, way faster. Cheers, eh. - Aggressive & progressive geometry - Designed around 29x2.6" tires - Boost 148mm rear hub - Full internal cables - Slayer fit & feel, in a hardtail

It'll take way more than hell freezing over to stop the Blizzard. With massive tire real-estate and mega clearance, snow's no issue for the Blizzard. Don't mistake it for a fat-tired gimmick—aggressive trail geometry and a no-nonsense mountain bike ride character differentiates it from the bandwagoners. The result? Send trail and rip commutes as aggressively and shredly as you want. Winter's here. Ice to see you.

The Growler proves that the secret order of hardtail trail shredders is alive and thriving. Sure, it’s got that classic hardtail profile. But 21st century touches across the platform reveal a future proofed, instant classic. 29x2.6 tires for ridiculous grip. An aggressive ride character for surprising levels of confidence while descending or ripping tough trails. A refreshingly simple (and tough) package for rowdy days at the trails. More satisfying than a tropical IPA growler fill on a hot day—and way, way faster. Cheers, eh.

From all day epics to technical singletrack, we've got you covered. If you're looking for one bike that does it all, look no further than the Instinct. We've designed a bike that's capable of tackling technical trail riding but still allows you to push the pedals hard on the climbs. We've updated the geometry, frame features, and suspension kinematics to make sure you feel confident on the up's, down's, and everything in between. Trust your Instinct. What sets the Instinct apart. Total trail precision Razor sharp handling and a buttery but efficient suspension setup means satisfying small bump compliance and addictive flickability. Hitting the sweet spot between big hit confidence and surgical levels of precision, it rewards the rider ready to ride more of everything, faster. An Instinct for every rider Embiggening or shrinking a frame isn't enough. That's why the Instinct comes in six distinctly sized frames with specific suspension kinematics and two wheel-size options. It's the only way to ensure every element of the Instinct's character gets fully realized for every rider. The right setup for any trail Total precision is yours on any trail with our RIDE-9 adjustment system and 2-position rear axle that allows for chainstay length adjustment. It's everything you need to quickly arrive on the best setup for the trail ahead. - The most versatile platform in our range - Perfect blend of climbing and DH performance - Adjustable chainstay length to suit the rider - Kinematics, fit & wheel size adjusted per size Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – X-Large: 29-inch

From all day epics to technical singletrack, we've got you covered. If you're looking for one bike that does it all, look no further than the Instinct. We've designed a bike that's capable of tackling technical trail riding but still allows you to push the pedals hard on the climbs. We've updated the geometry, frame features, and suspension kinematics to make sure you feel confident on the up's, down's, and everything in between. Trust your Instinct. What sets the Instinct apart. Total trail precision Razor sharp handling and a buttery but efficient suspension setup means satisfying small bump compliance and addictive flickability. Hitting the sweet spot between big hit confidence and surgical levels of precision, it rewards the rider ready to ride more of everything, faster. An Instinct for every rider Embiggening or shrinking a frame isn't enough. That's why the Instinct comes in six distinctly sized frames with specific suspension kinematics and two wheel-size options. It's the only way to ensure every element of the Instinct's character gets fully realized for every rider. The right setup for any trail Total precision is yours on any trail with our RIDE-9 adjustment system and 2-position rear axle that allows for chainstay length adjustment. It's everything you need to quickly arrive on the best setup for the trail ahead. - The most versatile platform in our range - Perfect blend of climbing and DH performance - Adjustable chainstay length to suit the rider - Kinematics, fit & wheel size adjusted per size Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – X-Large: 29-inch

Buying a bike for your child can be daunting—that's why we developed the Zuma range to make it easier. Based on the concept of a kid-sized MTB bike, the Zuma bikes are incredibly lightweight. They feature a carefully researched geometry and are designed specifically around smaller riders as the perfect balance between a bike for a child to learn the basics on and a more advanced MTB for off-road riding conditions and weekend rides with the parents. These carefully spec'd bikes feature a super lightweight alloy frame and fork with double-wall rims and children's-specific aftermarket components from Promax, KMC, FSA, Vee Rubber, and Satori, making them suit the rider's size perfectly while keeping the look, feel, and ride of a high-end, full adult size MTB. Children are the future, and the Zuma line is designed to give them the best possible start for that future.

A Podium Seeking Missile. UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium-seeking missile crafted from the ground up is a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and traceability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build is aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. LESS WEIGHT, A CONTINUING EVOLUTION Thanks to the continuing evolution of our proprietary Hollow Core carbon fiber construction, the new Mach 4SL carves an impressive 280 grams out of the previous generation Mach 4SL. This absence of mass was achieved while improving the dw-link suspension, and without sacrificing strength, frame stiffness, or handling integrity. PRODUCT DETAILS: Get everything you need to know about the Mach 4 SL. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4’10” to 6’ 7” - Large Water Bottle Clearance on All Sizes - Pivot’s full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4’10” to 6’7” has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout Available - 100mm & 120mm Fox Fork Options

Do Everything, and Do It Better The new Switchblade has a slacker head angle, steeper seat angle, increased reach and a longer wheelbase than its predecessor. Size-specific chainstays are tucked in and responsive but grow incrementally longer on larger frames. This translates to added stability at warp speeds while still maintaining the snap and pop that is ingrained in the Switchblade’s DNA. From Trail to Park The new Switchblade is light enough to pedal all day, but stout enough to run a Fox 38 without any worries. You can spin this rig up into the jagged high places, and it is burly enough, composed enough, planted enough and smooth enough to smash every line all the way back down, laughing the whole way. Hail the Evolution! The latest iteration of this legendary machine features an incredibly refined dw-Link suspension that stitches together the pedaling response and agility of the Trail 429 with the battle-hardened, EWS-proven, big terrain suspension and handling chops of the Firebird. Pivot trail bikes pedal with near cross-country race efficiency for the longest, steepest climbs, but with the chops to carry you through technical trails that verge on black diamond. These bikes have you covered no matter what the trail dishes out. PRODUCT DETAILS: - Ultra-Light Hollow Core Carbon Frame. - Size Specific Chainstays. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling. - Hassle free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+” and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.

Comfortable, enjoyable mobility: that's Citizen. This is the ultimate low-carbon-footprint, sightseeing machine. It's a low-impact and fun workout for new cyclists and a zero-emissions way to get around town. We can't think of a better way to be a good Citizen. Easy to look at. Easy to get on We're super proud of the Citizen's sleek frame design. With an arcing top tube for the "men's" frames and s-bend top and down tubes for a super-low step-thru 'women's" version. In fact, we hesitate to designate either with gender specific labels because the version with the easy-access, low step-over top tube is suitable for anyone with limited hip flexibility who might be challenged to swing a leg over the rear wheel when mounting & dismounting. And easy to ride When it comes to recreational riding, nothing gets more uncomfortable faster than having to pedal more weight than necessary. That is why Citizen 1, 2 & 3 are built with lightweight 6061 aluminum tubing. In fact, our aluminum Citizen frames are at least a half-pound lighter than our famous steel coda street bikes. We design comfort into the naturally stiffer ride of the aluminum tubes by specifying larger volume 38c tires and adding a few millimeters to the chainstay and wheelbase length. Ride position A usual complaint from new or returning riders trying to get into the cycling groove is feeling uncomfortably perched forward with too much weight on their wrists and having to crank their necks backwards just to be able to see in traffic. We specifically designed our Citizens to remedy this. The large diameter 700c wheels push handlebar height up and shorter top tubes pull handlebars closer to the saddle, all to mitigate forward lean. Our 4-inch rise handlebars sweep back at a natural hand-grasp angle with a long-quilled or angle-adjustable stem that allows for a wide range of adjustment to tune handle bar height and reach perfectly for each ride. Where it counts Our super plush saddle features memory foam padding (Citizen 2 & 3) or extra high-quality polyurethane padding (Citizen 1 & Citizen) for optimum support with maximum comfort. The slip-resistant suede-type top prevents sliding and the burnished side panels reduce leg friction while pedaling. Elastomer springs help soak up high resonance road vibrations. Offered in gender-specific sizes. Why 700c? So why go with a Citizen instead of an Explorer or a Hudson since they all seem to offer many of the same comfort and quality attributes? It's simple: if your riding will be primarily on the road or on smoothly graded trails, the larger diameter road-bike sized 700c Citizen wheels roll faster with less rolling resistance and roll over potholes and railroad tracks more smoothly than the 27.5" wheels of the Explorer and Hudson. Geared to go The drivetrains on our Citizen 1, 2, & 3 all feature long cage rear derailleurs, full- size 48/38/28t triple chainring cranksets, and big 11-32t or 14-34t gearing in the back. This gives you the dual advantage of having fairly tall gears for controlled pedaling at speed on descents as well as really low gearing for easier pedaling uphill. It's a rider-friendly combination that's made the Citizens a perennial favorite of recreational cyclists.

Our Codas have been some of our most popular bikes for years, and for good reason. There's the smooth-riding Reynolds Chromoly frames, the well-thought-out geometry, and the heads-up riding position. Not to mention the smart component selections, from a super-wide gearing range to easy-adjust stems. These bikes are simply some of the best and most versatile around.

TOP FIVE THINGS YOU NEED TO KNOW - The full-length & full ring-wrap chainguard on Miss Daisy keep clothes & legs cleanly and safely out of the way of the chain. Those attractively painted fenders keep the rain & mud off the bike AND the rider and look cute to boot. - Our soft and comfortable foam grips feature a smooth vinyl cover that is embossed and stitched to match the saddle & decal theme. - Those wide Brooklyn Speedway tires offer a large contact patch for greater stability, with a smooth tread surface for easy rolling, and hold plenty of air volume for a more comfortable ride. - Our pedals offer a non-slip insert that keeps feet and shoes in full contact even when wet for safe & secure pedaling. - Every 16" Miss Daisy offers stabilizing training wheels that assist the young rider in learning how to pedal, steer and balance a bike for the first time. The training wheel support struts attach securely both to the rear hub axle and the frame itself so that the training wheels don't rotate out of a plane with the rear wheel, preventing tips or spills.

Boss Cruiser BC is what we’d call seriously casual— designed to be low maintenance, built for comfort, but with the durability to be ridden every day for years. Sometimes, all you need is one gear and a coaster brake, and that’s just what you get. The Boss Cruiser BC keeps it simple, so you can keep smiling, and a Step-Over frame makes getting on and off a breeze. Laid-back cruiser bars and a double-sprung saddle let you keep your chill all day long, and cushy tires iron out the boardwalk and choppy roads for silky-smooth cruising.

Every Jamis youth bike uses size-specific items like grips, saddles and cranks that enhance comfort and control by providing the best possible bike fit. We focus on designing frames with low stand-overs to take much of the awkwardness out of getting on board and dismounting after. We trim as much weight as we can with lightweight aluminum frames on many of the youth models and use aluminum parts where possible (the limiting factor here is working within a youth-bike-appropriate price point) to work towards that make-it-as-light-as-possible goal.

Boss Coaster is what we’d call seriously casual— designed to be low maintenance, built for comfort, but with the durability to be ridden every day for years. Sometimes, all you need is one gear and a coaster brake, and that’s just what you get. The Boss Coaster keeps it simple, so you can keep smiling. Laid-back cruiser bars and a double-sprung saddle let you keep your chill all day long, and cushy tires iron out the boardwalk and choppy roads for silky-smooth cruising.

LEGENDARY FRAME DESIGN These one-piece single-loops stays with trailing dropout plate have been a Boss and Taxi signature since 1980. Reducing the number of rear triangle welds makes these frames stronger and stiffer. And we don’t have to swage the tubes to a smaller diameter to mate with standard tabbed dropouts, allowing the stays to remain near constant in diameter, yielding an even stronger frame with a bigger, bolder style. LIGHTWEIGHT Many cruisers weigh well north of 40 pounds. Not so with the Boss and Taxi! Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we’ve pared as many grams from these bikes as we could. Starting with the lightweight aluminum frame and a parts pick that’s nearly all lightweight alloy parts. The results are bikes just north of 30 pounds that are easy to pedal and more fun to ride. PERFECT FIT All Boss frame sizes (and there are six to assure the best possible fit for greater comfort and more secure handling) offer an extra-long stem quill and head tube and hi-rise handlebars for a comfortable, upright ride position EASY TO SIT ON The Boss Saddle is as plush as it gets -- quilted top, wide body, fully stuffed, double-loop springs -- and is offered in both male and female specific lengths and widths. The Taxi saddle is as durable as it gets, with an extra-thick 3 mil cover to resist puncture, a flat top that won’t pool water when the Taxi is parked in the rain, box section rails that will never bend, and double-loop springs that comfortably support passengers. SMOOTH ROLLING TIRES Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.35” footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. COMFORTABLE STEERING Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider’s hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. RUST RESISTANT Many of the parts specified on our Boss and Taxi are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand, and crank arms. We’ve even specified a specially treated chain on the Taxi that protects the chain against rust in even the harshest conditions. In fact, this coating increases the rust-resistance of the chain up to 500 times that of a regular chain.

The Trail XR is built for the rider looking for quality, versatility, and affordability in a bike that can handle city streets, rail trails, campus short cuts, and suburban cul-de-sacs with comfort and confidence. Inspired by our trail mountain bikes, but tuned for everyday 'round-town regular riding, the XR is the perfect fat-tired solution for the buyer on a budget.

QUALITY, VERSATILITY, AFFORDABILITY The Trail XR is built for the rider looking for quality, versatility, and affordability in a bike that can handle city streets, rail trails, campus shortcuts, and suburban cul-de-sacs with comfort and confidence. Inspired by our Trail X mountain bikes, but tuned for everyday 'round-town regular riding, the XR is the perfect fat-tired solution for the buyer on a budget. - Frame designed for all-around ride comfort. Not too aggressive, not too laid back. - Dependable hi-tensile unicrown fork, with over-sized radiused blades - Shimano Revoshift 35, 21-speed shifting - Forged alloy crank - Alloy linear pull brakes with full alloy 4-finger levers - Jamis XC riser handlebar for a comfortable ride position - Jamis alloy micro-adjust seat post - Jamis ATB Sport saddle with protective front and rear guards

Our Boss Cruiser is what we’d call seriously casual—designed to be low maintenance, built for comfort, but with the durability to be ridden every day for years on end. The versatile Boss Cruiser 7 gets you up to speed with a Shimano drivetrain and safely to a stop with dual hand brakes. Legendary Frame Design These one-piece single-loops stays with trailing dropout plate have been a Boss signature since 1980. Reducing the number of rear triangle welds makes these frames stronger and stiffer. And we don’t have to swage the tubes to a smaller diameter to mate with standard tabbed dropouts, allowing the stays to remain near constant in diameter, yielding an even stronger frame with a bigger, bolder style. Lightweight Many cruisers weigh well north of 40 pounds. Not so with the Boss! Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we’ve pared as many grams from these bikes as we could. Starting with the lightweight aluminum frame and a parts pick that’s nearly all lightweight alloy parts. The results are bikes just north of 30 pounds that are easy to pedal and more fun to ride. Perfect Fit All Boss frame sizes offer an extra long stem quill and head tube and hi-rise handlebars for a comfortable, upright ride position. Easy To Sit On The Boss Saddle is as plush as it gets—quilted top, wide body, fully stuffed, and double-loop springs Smooth Rolling Tires Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.35” footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. Comfortable Steering Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider’s hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. Rust Resistant Many of the parts specified on our Boss bikes are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand and crank arms. - Diamond frame design with 6061 aluminum - Oversized hi-tensile steel tubular unicrown fork - Alex Y303 36H black anodized alloy wheel set - 7-speed Shimano Tourney components

LEGENDARY FRAME DESIGN These one-piece single-loops stays with trailing dropout plate have been a Boss signature since 1980. Reducing the number of rear triangle welds makes these frames stronger and stiffer. And we don’t have to swage the tubes to a smaller diameter to mate with standard tabbed dropouts, allowing the stays to remain near constant in diameter, yielding an even stronger frame with a bigger, bolder style. LIGHTWEIGHT Many cruisers weigh well north of 40 pounds. Not so with the Boss! Because nothing gets more uncomfortable faster than having to pedal more weight than necessary, we’ve pared as many grams from these bikes as we could. Starting with the lightweight aluminum frame and a parts pick that’s nearly all lightweight alloy parts. The results are bikes just north of 30 pounds that are easy to pedal and more fun to ride. PERFECT FIT All Boss frame sizes (and there are six to assure the best possible fit for greater comfort and more secure handling) offer an extra-long stem quill and head tube and hi-rise handlebars for a comfortable, upright ride position EASY TO SIT ON The Boss Saddle is as plush as it gets—quilted top, wide body, fully stuffed, double-loop springs—and is offered in both male- and female-specific lengths and widths. The Taxi saddle is as durable as it gets, with an extra-thick 3 mil cover to resist puncture, a flat top that won’t pool water when the Taxi is parked in the rain, box section rails that will never bend, and double-loop springs that comfortably support passengers. SMOOTH ROLLING TIRES Our comfort tires have been designed to roll smoothly on pavement, but offer a large 2.35" footprint so that rides on park paths can be managed securely. The additional benefit of that big footprint is larger air volume in the tire and tube, which results in lower air pressure for a more comfortable ride than tires with smaller volumes and higher air pressures. COMFORTABLE STEERING Our cruise-control handlebars were designed to promote a comfortable no-weight-on-the-wrists riding position. With just the right sweep and rise, these handlebars meet the rider’s hands without requiring a forward bend at the waist, relieving pressure on the back of the neck. Handlebar width has also been carefully calculated so that when steered from left to right it does not contact the rider, unlike many other cruiser-style handlebars. RUST RESISTANT Many of the parts specified on our Boss are made of aluminum to save weight, but also to help preserve the finish of the bike. Aluminum parts include the seat post, seat clamp, stem, rims, front hub, kickstand, and crank arms. We’ve even specified a specially treated chain on the Taxi that protects the chain against rust in even the harshest conditions. In fact, this coating increases the rust-resistance of the chain up to 500 times (!) that of a regular chain.